SAFETY SENSOR

The ZAM – OSS – ADS is a sensor which combines radar technology for the activation of the door and infrared technology for the user protection. The unidirectional radar enables energy savings to be made. The three-dimensional infrared curtain protects people from any contact with the doors.

Features

  • Intuitive configuration
  • Energy-saving
  • Visual aids
  • Stable & reliable

Specifications

Supply voltage: 12 V – 24 V AC +/-10% ; 12 V – 30 V DC +/-10% (to be operated from SELV compatible power supplies only)
Power consumption: < 2.5 W
Mounting height: 2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height)
Temperature range: -25°C to +55°C; 0-95% relative humidity, non condensing
Degree of protection: IP54
Noise: < 70 dB
Expected lifetime: 20 years
Detection mode: Motion Min. detection speed: 5 cm/s Presence Typical response time: < 200 ms (max. 500 ms)
Technology: Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2 Active infrared with background analysis Spot: 5 cm x 5 cm (typ) Number of spots: max. 24 per curtain Number of curtains: 2
Output: IXIO-DT1/-DP1 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC IXIO-DT3/DP3 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC In switching mode: NO/NC In frequency mode: pulsed signal (f= 100 Hz +/- 10%) Galvanically isolated current source No detection: current source ON Open circuit voltage: 6.5 V Output voltage available at 10 mA: 3 V min. Typical load: up to 3 optocouplers in series Detection: current source OFF Open-circuit remained voltage: < 500 mV IXIO-DT3/-DT1 Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC Holdtime: 0.3 to 1 s IXIO-DP3/-DP1 Pulse polarity: negative Level: – Standby: Pulse from V to ground – Detection: V Supply Topology: op-collector with 4.7 K to 3.3 V Max. sink current: 25 mA with external 1 K to 24 V
Input: IXIO-DP3/-DP1 Pulse polarity: positive or negative (adjustable) Impedance: – Positive pulse: 2 K to ground – Negative pulse: 470 R to + sensor power supply Pulse voltage: 6 V to 30 V Pulse duration: 4 μs to 500 μs Duty cycle: max. 50%
Test input: IXIO-DT3/-DT1 Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms
Norm conformity: This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.

Reviews

There are no reviews yet.

Be the first to review “SAFETY SENSOR”

Your email address will not be published. Required fields are marked *