MOTION & PRESENCE SENSOR FOR INDUSTRIAL DOORS

The ZAM – MPS – ID has a microwave motion detector and an active infrared presence sensor built in the same housing. The signal treatment results in an accurate precision to filter out pedestrians, cross-traffic and possible interferences. The active infrared technology offers a presence area where every vehicle and object standing still close to the door will be detected.

Features

  • Accurate & reliable
  • Energy-savings
  • Fast installation and service
  • Designed for industrial environments

Specifications

Supply voltage: 12V to 24V AC ±10%; 12V to 24V DC +10% / -3%
Power consumption: < 3.5 W / VA
Mains frequency: 50 to 60 Hz
Output: Max. contact voltage: Max. contact current: Max. switching power: 2 relays (free of potential change-over contact) 42 V AC/DC 1 A (resistive) 30 W (DC) / 48 VA (AC)
Output holdtime: 0.5 s
Mounting height: CONDOR: 3.5 m – 6 m; CONDOR XL: 2 m – 3.5 m
Temperature range: from -30 °C to + 60 °C
Humidity: 0 – 95% non condensing
Degree of protection: IP65
Dimensions: 127 mm (L) x 102 mm (H) x 96 mm (W)
Materials: ABS and polycarbonate
Weight: 400 g
Cable lenght: 10 m
Norm conformity: EN 300 440-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-3 V1.6.1, EN 62311, EN 62479
Technology: microwave doppler radar active infrared
Transmitter frequency/wavelength: 24.150 GHz 875 nm
Transmitter power density: < 5 mW/cm² < 250 mW/m²
Detection mode: motion motion & presence
Detection field: CONDOR: 4 x 5 m CONDOR XL: 4 x 2 m 4 m x 4 m (emitting spots)
Min. detection speed: 5 cm/s 5 cm/s to activate detection
Reaction time: 100 ms 250 ms
Tilt angle: This product conforms to all applicable European Union legislation. Please refer to the Declaration of Conformity for further information.

Reviews

There are no reviews yet.

Be the first to review “MOTION & PRESENCE SENSOR FOR INDUSTRIAL DOORS”

Your email address will not be published. Required fields are marked *