Falcon Industrial Door Sensor

The FALCON is a unidirectional motion sensor optimizing the performance of automatic doors. The FALCON detects every type of target and can filter people. Detecting vehicles only allows to reduce the door closing cycle by rejecting cross-traffic. Mounted at 7 m the FALCON has a detection field of 4 x 5 m. At 3.5 m, the FALCON XL detects in an area of 4 x 2 m.

ZAMTAS
BEA Falcon Sensor

Vehicle detector Sensors for Industrial Doors , for vehicle sensing providing door activation.

Options :  Vehicle and Pedestrian Sensing Programmable ,    only vehicles (E.g Forklifts , Elecric Trollyes / small carriage vehicles sensing )  or both option of pedestrian and vehicle sensing.

TECHNOLOGY:Radar
TABLE OF SPECIFICATIONS
TECHNOLOGY: microwave doppler radar
TRANSMITTER FREQUENCY: 24.150 GHz
TRANSMITTER RADIATED POWER: < 20 dBm EIRP
TRANSMITTER POWER DENSITY: < 5 mW/cm²
DETECTION MODE: motion
DETECTION ZONE: FALCON: 4 x 5 m ; FALCON XL: 4 x 2 m (typical at 30° and fi eld size 9)
MIN. DETECTION SPEED: 5 cm/s
SUPPLY VOLTAGE: 12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
MAINS FREQUENCY: 50 to 60 Hz
MAX POWER CONSUMPTION: < 2 W
OUTPUT: relay (free of potential change-over contact)
MAX. CONTACT VOLTAGE: 42V AC/DC
MAX. CONTACT CURRENT: 1A (resistive)
MAX. SWITCHING POWER: 30W (DC) / 60VA (AC)
LED-SIGNAL: red: detection state, parameter indication; green: value indication
MOUNTING HEIGHT: FALCON: 3.5 m – 7m; FALCON XL: 2 m – 3.5 m
DEGREE OF PROTECTION: IP65
TEMPERATURE RANGE: from -30 °C to + 60 °C
DIMENSIONS: 127 mm (L) x 102 mm (H) x 96 mm (W)
TILT ANGLES: 0° to 180° vertical
MATERIALS: ABS and polycarbonate
WEIGHT: 400 g
CABLE LENGTH: 10 or 15 m
NORM CONFORMITY: EN 300 440-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-3 V1.6.1, EN 62311, EN 62479

Reviews

There are no reviews yet.

Be the first to review “Falcon Industrial Door Sensor”

Your email address will not be published. Required fields are marked *