Insulated sectional overhead doors

Industrial Overhead Sectional Doors.

Sectional Lifting Door The Series ZAM-SD can provide a highly efficient solution to your opening. They may also be referred as Overhead doors are commonly used for confined spaces and are custom made to the size as per requirement.

FEATURES:

Slick design, with steel column sections, fully powder coated to color selection.
Full-width clear vision window for increased safety.
Heat insulated and weatherproof.
Single-phase control system with spring break safety feature.
Long-life components which are simple to service.
Additional crash prevention features such as cable break safety.

APPLICATIONS:

Workshop, warehouse, factory and logistics centre.

Techincal Data

1) Panel thickness: 40mm, 50mm with the 0.326mm,0.40mm and 0.45mm

glavanize steel sheet

2) door panel heat consumption factor: k= 1.2(W/mk)

3) high density: 42kgs/m3

4) Water tightness: class two

5) Resistance to wind load: class two

6) Air permeability: class four

7) Applicable standards: EN13241-1:2003,EN ISO 12100-1:2003,EN ISO12100-2:2003 EN ISO 14121-1:2007,EN 60204-1:2006, EN 61000-6:2005, EN61000-6-3:2007

8) Long Working Cycle Life.

9) The working temperature: -30C – 50C

10) Maximum width: 11800mm

11) Section height: any size between 440-550mm

12) Surface finish: Wood grain or stucco embossment surface increases

intensity and gives better appearance

13) Panel design: stripes, blocks, one stripe, flat, wavy and smooth.

14) Full range of colors are available:

A.standard RAL number: such as White (RAL9016),Grey(RAL7016), Brown (RAL8014), silver(RAL9006), and so on.

B. wood imitation color: Golden oak, Mahogany, Dark oak , Marple and Black walnut.

15) Suitable for workshops, warehouse, and commercial shops

16) weatherstripping: provide complete perimeter seals include flexible top seal,jamb seal and special industrial bottom seal

17) Opening way: remote control , automatic,manual,chain hoist

Hardware:

Single steel track with L-profile	Buffering( for option)
Hinges	Latch(for passing door)
Top bracket	Closer(for passing door)
Cable anti-break device	Struct(big door)
cable	sealing(side/top and bottom)
cable drum	shaft(hollow/K/soild)
spring	Spring bracket
2.5m multi-angle track	roller
screws	handle

Download:

Brochure

Activation and Safety Sensors:

OPENING SENSOR Model: FALCON The FALCON is a unidirectional microwave motion sensor optimizing the performance of automatic industrial doors. Download Pdf Document Here	Touchless Activation Switch Sensing range from 100mm to 200mm Download Pdf Document Here!	OPENING SENSOR Model: EAGLE\|\|uni and bi-directional sensor The EAGLE is a microwave sensor that can be mounted on all types of automatic doors.
Infrared Photocell The infrared photocell can detect the signal and transmitted it to the control system to control the doorstop operation or return up. The infrared distance from 1 meter to 15 meters; also can be set with remote control together.